Nexus#
Nexus#usb1:2011 Aug 15 14:23:44 Nexus %$ VDC-1 %$ %IDEHSD-2-MOUNT: USB1: online
Nexus#
Nexus#dir

   25140224    Aug 12 09:57:24 2011  n5000-uk9-kickstart.5.0.3.N2.1.bin
  147256572    Aug 12 10:08:08 2011  n5000-uk9.5.0.3.N2.1.bin

Usage for usb1://sup-local
  378224640 bytes used
 3627515904 bytes free
 4005740544 bytes total

Nexus# copy usb1:n5000-uk9-kickstart.5.0.3.N2.1.bin bootflash:
Copy progress 100% 25140KB
Nexus# copy usb1:n5000-uk9.5.0.3.N2.1.bin bootflash:
Copy progress 100% 147256KB
Nexus#

Nexus#
Nexus# install all ?
  <CR>      
  kickstart  Boot-variable name
  ssi        Boot-variable name
  system     Boot-variable name

Nexus# install all kickstart bootflash:n5000-uk9-kickstart.5.0.3.N2.1.bin system bootflash:n5000-uk9.5.0.3.N2.1.bin

Verifying image bootflash:/n5000-uk9-kickstart.5.0.3.N2.1.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS

Verifying image bootflash:/n5000-uk9.5.0.3.N2.1.bin for boot variable "system".
[####################] 100% -- SUCCESS

Verifying image type.
[####################] 100% -- SUCCESS

Extracting "system" version from image bootflash:/n5000-uk9.5.0.3.N2.1.bin.
[####################] 100% -- SUCCESS

Extracting "kickstart" version from image bootflash:/n5000-uk9-kickstart.5.0.3.N2.1.bin.
[####################] 100% -- SUCCESS

Extracting "bios" version from image bootflash:/n5000-uk9.5.0.3.N2.1.bin.
[####################] 100% -- SUCCESS

Performing module support checks.
[####################] 100% -- SUCCESS

Notifying services about system upgrade.
[####################] 100% -- SUCCESS

Compatibility check is done:
Module  bootable          Impact  Install-type  Reason
------  --------  --------------  ------------  ------
     1       yes      disruptive         reset  STP ISSU preupgrade check failed - Upgrade needs to be disruptive!

Images will be upgraded according to following table:
Module       Image         Running-Version             New-Version  Upg-Required
------  ----------  ----------------------  ----------------------  ------------
     1      system             5.0(2)N2(1)             5.0(3)N2(1)           yes
     1   kickstart             5.0(2)N2(1)             5.0(3)N2(1)           yes
     1        bios      v1.8.0(10/06/2010)      v3.5.0(02/03/2011)           yes
     1   power-seq                    v3.0                    v3.0            no
     1          uC                v1.1.0.1               v1.0.0.14            no

Additional info for this installation:
--------------------------------------

Port: Ethernet1/2 in VLAN0001 is Designated. Topology change could occur during ISSU.
Upgrade needs to be disruptive!!!

Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)?  [n] y

Install is in progress, please wait.

Performing runtime checks.
[####################] 100% -- SUCCESS

Setting boot variables.
[####################] 100% -- SUCCESS

Performing configuration copy.
[####################] 100% -- SUCCESS

Module 1: Refreshing compact flash and upgrading bios/loader/bootrom/power-seq.
Warning: please do not remove or power off the module at this time.
Note: Power-seq upgrade needs a power-cycle to take into effect.
On success of power-seq upgrade, SWITCH OFF THE POWER to the system and then, power it up.
Note: Micro-controller upgrade needs a power-cycle to take into effect.
On success of micro-controller upgrade, SWITCH OFF THE POWER to the system and then, power it up.
[####################] 100% -- SUCCESS

Finishing the upgrade, switch will reboot in 10 seconds.
Nexus# Shutdown Ports..
 writing reset reason 49,
INIT: Sending processes the TERM signal Aug 15 14:34:39 %KERN-0-

Aug 15 14:34:39 %LIBSYSMGR-3-SIGTERM_FORCE_EXIT Service "vshd" (PID 4274) is forced exit.

Nexus#
Nexus# sh ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2011, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
  BIOS:      version 3.5.0
  loader:    version N/A
  kickstart: version 5.0(3)N2(1)
  system:    version 5.0(3)N2(1)
  power-seq: Module 1: version v3.0
             Module 3: version v2.0
  uC:        version v1.1.0.1
  BIOS compile time:       02/03/2011
  kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.3.N2.1.bin
  kickstart compile time:  6/13/2011 6:00:00 [06/13/2011 13:43:33]
  system image file is:    bootflash:/n5000-uk9.5.0.3.N2.1.bin
  system compile time:     6/13/2011 6:00:00 [06/13/2011 15:33:42]

Hardware
  cisco Nexus5548 Chassis ("O2 32X10GE/Modular Supervisor")
  Intel(R) Xeon(R) CPU         with 8299528 kB of memory.
  Processor Board ID JAF1513CCAL

  Device name: Nexus
  bootflash:    2007040 kB

Kernel uptime is 0 day(s), 0 hour(s), 3 minute(s), 37 second(s)

Last reset at 226877 usecs after  Mon Aug 15 14:34:39 2011

  Reason: Disruptive upgrade
  System version: 5.0(2)N2(1)
  Service:

plugin
  Core Plugin, Ethernet Plugin